Products Categories

Home > Products > Feeding and conveying System > TAL - Direct/Automatic Autoloader

TAL - Direct/Automatic Autoloader

1. Stainless steel hopper, ensure that the material is not contaminated;
2. TAL-300E/360E equipment use beam photoelectric switch, which suitable for direct mounting the molding machine feed inlet;
3. TAL-360 / 360E are equipped with hinged hopper lid and all configured filter cloth and automatic spraying dust removal function;
4. It equipped with a full range of manual control switch.


Model TAL-300 TAL-300E TAL-360 TAL-360E TAL-400
Fan type Brushless Brushless Brushless Brushless Induction
Motor Power(Kw) 1.15 1.15 1.15 1.15 0.75
Conveying pipe diameter(Inch) 1.5 1.5 1.5 1.5 1.5
Transmission capacity(Kg/Hr) 200 200 200 200 200
Hopper capacity(L) 6 6 6 6 6
Input voltage 1Phase/220VAC/50HZ 3Phase/380VAC/60HZ
Level mode Micro Switch photoelectric switch Micro Switch photoelectric switch Micro Switch
Automatic cleaning - - Standard Standard -
Cloth filter - - Standard Standard -
Outside size Lmm 550 660 670 670 770
Wmm 370 340 385 385 460
Hmm 420 390 380 380 460
Weight(Kg) 13 14 14 14 23

Product case

Factory show


1. Multiple packing: proved by tests of the compression resistance, throwing. And highly secured.
2. Plywood case packing: High resistance of burst strength, ring crushing strength and tearing strength.
3. Wooden frame parking: Damp-proved and high resistance burst strength and ring crush strength.

Related Products

  • Round Cooling TowerRound Cooling TowerGood shape with small outside size, light weight; Optimum structure; The cooling tower body is made of FRP, which is anti-aging, anti-corrosion, without fading and distortion;
  • TCD - Box DryerTCD - Box DryerTCD - Box Dryer has movable plate, put the raw material on the dish. At the machine running, the windmill forcing air through heating tube/heating wire, then evenly through all the wind blowing the raw material plate.
  • Oil type mold temperature controllerOil type mold temperature controllerPID adopted to control the temperature. Keeping the error within ±0.1°C.Keeping long time constant temperature, high efficiency and energy saving
Copyright © 2005-2018 Dgdinyuan Inc. All rights reserved
Site Map