Products Categories

Dehumidifier

Dingyuan’s Honeycomb Rotor Dehumidifier are mainly to work with hopper dryers together which are specialized for drying engineering plastics to contain high hygroscopicity such as Nylon, PBT, PET etc.
The rotor is divided into three areas: dehumidifier zone, regeneration zone and cooling zone.
They work at the same time. It adopts high efficiency rotor which can ensure dew- point at -70℃ with stable dehumidifying effect.

Specifications

原料 干燥时间(hr) 干燥温(℃) 初期含水率(%) 干燥能力
DYFD 60 DYFD 90 DYFD 120 DYFD 150 DYFD 200 DYFD 300 DYFD 400 DYFD 500 DYFD 800 DYFD 1000 DYFD 1500
ABS 3~4 80-90 0.4 13 28 37 73 110 145 220 275 460 550 825
SBS/PC 3~4 100 0.35 15 33 43 87 118 175 235 290 440 590 880
POM 2~3 90-100 0.25 26 47 71 88 118 176 235 294 441 588 882
PMMA 3~4 80 0.5 15 24 43 75 110 150 200 250 375 500 750
LONOMER 2~3 68 0.1 18 30 50 75 100 150 200 250 375 500 750
PA 4~6 70~80 0.4 11 17 30 60 90 120 180 225 375 450 675
PC 2~3 120 0.3 25 35 67 83 111 167 222 278 517 556 833
PCforCD 4 120 0.3 12 26 35 60 80 120 160 200 300 400 600
PU 3 90 0.9 25 40 50 60 100 150 200 250 400 500 750
PBT 3~4 130~140 0.3 18 28 50 83 111 167 222 278 417 556 883
PE 1~2 85 0.01 39 60 110 150 200 300 400 500 700 1000 1500
PET 5~6 150~180 0.3 10 20 27 40 73 107 160 200 300 400 560
PPO 2~3 100~120 0.5 19 30 55 100 133 200 267 333 500 667 1000
PL 2~3 120 25 35 67 83 111 167 222 278 417 556 883
PP 1 80~90 0.5 35 44 80 100 133 200 267 333 500 667 1000
PS 1 80~90 0.3 35 55 100 150 200 300 400 500 800 1000 1500
PSU 3~4 120~130 15 24 43 87 130 173 260 325 500 650 975
PVC 1~2 70~80 0.3 42 61 120 150 200 300 400 500 800 1000 1500
SAN 2~3 80 0.3 19 30 55 100 133 200 267 333 500 667 1000
TPU 2~3 80~110 25 40 60 75 100 150 200 250 375 500 750
TPU 3 105 16 35 47 75 100 150 200 250 375 500 750
备注:1.以上干燥能力为理想状态下使用独立的干燥料斗。  2.再20℃的大气温度及65%的相对湿度下。

机型 HDR-80 HDR-120 HDR-150 HDR-200 HDR-300 HDR-400 HDR-500 HDR-700 HDR-1000 HDR-1200 HDR-1500 HDR-2000 HDR-2000 HDR-3000 HDR-4000
干燥能力 KW 0.75 1.1 1.5 2.2 3.8 5.5 7.5 2.2 3.7 3.7 5.5 5.5 3.7x2 5.5x2 7.5x2
再生风机 KW 0.2 0.375 0.375 0.375 0.75 0.75 1.5 1.5 1.5 2.2 2.2 2.2 1.5x2 2.2x2 2.2x2
再生电热 KW 3.8 3.8 5.4 5.4 7.2 7.2 10 15 12 12 12 15 12x2 15x2
出入风口径 lnch 2 2 2.5 2.5 3 3 4 4 5 6 6 6 8 8 12
电压 V 220V/380V/415V//440V/3Phase
宽度 MM 600 600 630 630 700 700 850 1050 1050 1150 1300 1200 1500 1900 1800
深度 MM 680 780 850 850 1000 1000 1100 1400 1400 1500 1650 1520 2100 2800 2600
高度 MM 1300 1435 1550 1550 1640 1860 1940 2060 2085 2200 2270 2300 2450 2370 3200
冷却水口 Inch 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 11/4" 11/4" 11/4" 11/4"
重量 KG 215 265 272 392 405 570 650 880 970 970 1100 1800 1800 2200 3500
总力电 KW 4.8 5.3 7.3 8 11.8 13.5 19 15.7 17.2 17.2 22 34.5 34.5 44 58


Features

1. This series use P.I.D temperature control system, has regenerating temperature setting and real temperature display function.
2. Equips with dehumidifying heater and temperature control gauge as options to dry and dehumidify the raw material.
3. The dehumidifying system of the TD-H series features two condensers to ensure a low return air temperature and low dew-point.

structure chart

Product case

Factory show

Package

1. Multiple packing: proved by tests of the compression resistance, throwing. And highly secured.
2. Plywood case packing: High resistance of burst strength, ring crushing strength and tearing strength.
3. Wooden frame parking: Damp-proved and high resistance burst strength and ring crush strength.

Related Products

  • Euro stainless steel dryerEuro stainless steel dryerStainless and polished one-unit design ensure material free from contamination. It adopts “hot air down-blowing” and “cyclonic air exhausting” principle to ensure uniform dry efficiency. All these models are particularly for optics.
  • Air-cooled single head screw chiller (40-120HP)Air-cooled single head screw chiller (40-120HP)Industrial air-cooled screw Chillers are widely used in many industries like plastic and rubber manufacturing, electronic productions, electroplating, medical chemistry, ultrasonic cooling and printing business, etc.
  • Water cooled chillerWater cooled chillerThe water chiller is to provide a cooling process in plastic molding, to improve quality of molded products and shorten period of injection molding cycles. Hence maximizes productivity of plastic molding manufacturing
Copyright © 2005-2018 Dgdinyuan Inc. All rights reserved
Site Map
Top